MAIN PAGE  |  ABOUT US  |  SYNDIS  |  PRODUCTS  |  TRAININGS  |  PARTNERS  |  NEWS  |  SERVICE  |  CONTACT  |  PRIVACY POLICY    PL  |  EN  |  RU  |  DE   
Systems
SYNDIS RV
Dedicated systems
Devices
Servers and workstations
Substation automation
Disturbance recorders
Digital substation
Power quality analysers
Automation devices in MV networks
Control-measuring automation
Monitoring
AMR/AMI
Data transmission
GSM/GPRS/UMTS/LTE
Radio modems
Wire modems
Converters and separators
Multiplexers and duplicating
Data visualization
For smart building
Power supplying
Components
'MS' system modules (wide bus)
SO-52v11 family modules
SO-52v21 family modules
Controllers
Connection equipment
Specialized devices
SO-51 family modules
Applications
Area system with permission distribution
Substation system
SYNDIS ESB block transformer monitoring system
SYNDIS PQ power quality assessment system in a distribution company area
Controller RTU SO-52v21
Realization of automation functions in MV networks
Wind farms
SYNDIS RV AQUA
Devices > Data transmission > Transmission converters and separators []

Converters are single- or multi-channel devices that adapt the standard, type and type of transmission to the interfaces they are equipped with. Separators introduce the required galvanic separations.


 CRS-xxx converter []
 EVRS-001 converter []
 FLN-xxx
 FRS-485 converter []
 FRS-485A converter []
 GRS-xxx
 LTH-101
 LVDS-RS concerter []
 MST-40x
 OOK-xxx
 OPTOSPA
 ORS-xxx
 PSR-xxx
 RRS-485
 RSCL-002
 RS-ETH-003
 RSM-xxx
 SRS-485A
 SRS-485-KAM
 STS-xxx
 URS-485


CRS-xxx converter []

The CRS-xxx converter is intended for communication in networks using the PPM2 protocol based on CAN-BUS/RS-485 protocols.

...text in preparation


Exemplary CRS-001 device

 


EVRS-001 converter []

The EVRS-001 converters are used for communication with EVO meters using the RS-485 interface. The device of this group ensures galvanic separation of at least 1.6 kV between the EVO meter signals and the RS-485 interface side.

...text in preparation


Exemplary EVRS-001 device

 


FLN-xxx

The FLN-xxx converter (transcoder) is a device used to convert the SPA protocol into the Echelon® LonTalk® protocol. Signals of both protocols are fed by fiber optic interfaces. In addition, the transcoder is equipped with an RS-485 serial interface for the SPA protocol.

...text in preparation


Exemplary FLN-001 device

 


FRS-485 converter []

The FRS-485 converter is used to convert the RS-485 transmission standard to fiber-optic or RS-232 transmission standard. Data transmitted over the RS-485 interface can come from an RS-232 or fiber-optic interface. Each device in this group provides galvanic separation of at least 1.6 kV between signals of the RS-485 standard and the RS-232 interface side.

...text in preparation


Exemplary FRS-485 device

FRS-485A converter []

The FRS-485A converter is used to convert the RS-485 transmission standard and the four-wire RS-422 transmission to the optical fiber transmission standard.

...text in preparation


Exemplary FRS-485A devices

 


GRS-xxx

The GRS-xxx converter is used to connect the GPS-xxx device with a computer equipped with an RS-232 interface via an interface consisting of three optical fibers. It is also possible to use GRS-xxx converters to set up a fiber optic transmission path for transmitting transmitted, received data and an additional control signal.

...text in preparation


Exemplary GRS-320 device

 


LTH-101

_ Not recommended for apply in new solutions

The RS-LTH converter is designed for connecting devices equipped with an RS-485 port to an Ethernet network.

The structure of the device is oriented towards remote reading of electric energy meters in AMR systems and it enables mounting the converter on a terminal block cap of an electric energy meter. In AMR systems it operates as a gateway.

The converter may also applied when it is necessary to establish a connection between a LAN network and devices equipped with a serial port of the RS-485 type.

...text in preparation

 Brochure > LTH-101 [2,116kB]

LVDS-RS concerter []

The LVDS-RS converter is part of the SO-52v11 controller. Its purpose is to separate transmission and convert LVDS bus signals to the RS-485 standard or to fiber optic transmission.

...text in preparation


Exemplary LVDS-RS device

 


MST-40x

The MST-40x separator is a 4-channel V24 (RS-232) signal separator for a separated current loop signal of 20mA.

...text in preparation


Exemplary MST-405 device

 


OOK-xxx

Not recommended to apply in new solutions

The OOK-xxx converter is used to convert the standard of a two-wire fiber-optic line to another fiber-optic standard. The converter can also play the role of the so-called repeater, ie the regenerator of the signal of the selected fiber optic line standard.

...text in preparation

 


OPTOSPA

OPTOSPA converters are used to convert the RS-485 or TTL transmission standard to an optical standard. OPTOSPA converters are used to obtain electromagnetic, long-distance optical fiber transmission between devices equipped with RS-485 interface.

...text in preparation


Exemplary OPTOSPA-002 device

 


ORS-xxx

The ORS-xxx converter is used to convert the RS-232 transmission standard to transmission via a two-wire fiber-optic line. The converter ensures uninterrupted data transmission and complete galvanic isolation of devices operating in the presence of large electromagnetic interference.

...text in preparation


Exemplary ORS-120 device

 


PSR-xxx

The PSR-xxx separator is designed to protect the computer's serial ports in case they are exposed to various types of overvoltage that may damage them. The system ensures complete galvanic separation of all signals of the RS-232C standard, led out to the standard DSUB-9 type connector.

...text in preparation


Exemplary PSR-013 device

 


RRS-485

The RRS-485 converter enables the implementation of a fiber-optic, annular network of connections between devices equipped with a four-wire RS-485 interface. A fiber-optic network of this type can be combined single devices equipped with an RS-485 interface as well as groups of such devices.

...text in preparation


Exemplary RRS-485 device

 


RSCL-002

The RSCL-002 converter is designed to convert RS-232 transmission to transmission in the current loop standard 0÷20mA. The converter can be used to connect devices equipped with an RS-232 serial link with electricity meters having a CLO current loop standard (eg LZQM, LZM, LZQJ, ZMB, ZMD type counters).

...text in preparation


Exemplary RSCL-002 device

 


RS-ETH-003

The RS-ETH-003 converter is designed for connecting devices equipped with RS-232 or RS-485 ports to the Ethernet network. It can also be used wherever remote access is required and the device is equipped with a serial port. Using Ethernet as a transmission medium is the solution to this problem.

...text in preparation


Exemplary RS-ETH-003R device

 


RSM-xxx

The RSM-xxx converter is designed for modem communication in the BELL 202 or V23 standard between devices equipped with an RS-232 interface. Converters of this type enable the combination of dedicated connections in half-duplex mode (two-wire line) or full-duplex (four-wire line) in a large disturbance environment.

...text in preparation


Exemplary RSM-001 device

 


SRS-485A

The SRS-485A converters are used to convert the RS-232 transmission standard into a two-wire RS-485 standard and a four-wire RS-422 standard. Each device in this group provides galvanic separation of at least 1.6 kV between signals of the RS-232 standard and the side of the RS-485 interface (RS-422).

...text in preparation


Exemplary SRS-485A device

 


SRS-485-KAM

The SRS-485-KAM converters are used for communication with KAMSTRUP MULTICAL meters via the RS-485 interface. The device of this group provides galvanic separation of at least 1.6 kV between the signals of the KAMSTRUP meter and the RS-485 interface side.

...text in preparation


Exemplary SRS-485-KAM device

 


STS-xxx

The STS-xxx converter is a single- or two-channel signal converter of the RS-232 standard for a current loop signal of 20mA. The converter can be used to separate serial transmission between any devices equipped with RS-232 links.

...text in preparation


Exemplary STS-412 (left) and STS-512 (right) devices

 


URS-485

The URS-485 converters are used to convert the RS-232 transmission standard into a two-wire or four-wire RS-485 standard. Each device in this group provides galvanic separation of at least 1.6 kV between signals of the RS-232 standard and the RS-485 interface side.

...text in preparation


Exemplary URS-485 device

 

 
   Print    Send e-mail to us