MAIN PAGE  |  ABOUT US  |  SYNDIS  |  PRODUCTS  |  TRAININGS  |  PARTNERS  |  NEWS  |  CONTACT    PL  |  EN  |  RU  |  DE   
Systems
SYNDIS RV
Dedicated systems
Devices
Servers and workstations
Substation automation
Disturbance recorders
Digital substation
Power quality analysers
Automation devices in MV networks
Control-measuring automation
Monitoring
AMR/AMI
Data transmission
GSM/GPRS/UMTS/LTE
Radio modems
Wire modems
Converters and separators
Multiplexers and duplicating
Data visualization
For smart building
Power supplying
Components
'MS' system modules (wide bus)
SO-52v11 family modules
SO-52v21 family modules
Controllers
Connection equipment
Specialized devices
SO-51 family modules
Applications
Area system with permission distribution
Substation system
SYNDIS ESB block transformer monitoring system
SYNDIS PQ power quality assessment system in a distribution company area
Controller RTU SO-52v21
Realization of automation functions in MV networks
Wind farms
SYNDIS RV AQUA
Devices > Data transmission > Multiplexers and sygnal duplicating []

These devices are adapted for communication with many devices that do not require simultaneous operation. These devices work in address or unaddressed mode.


 MKT-130
 ORG-xxx
 STC-1xx
 STC-2xx
 STC-3xx
 UPT-00x
 ZDC-100


MKT-130

Not recommended for apply in new solutions

The task of MKT-130 is to transmit binary data in eight channels, in the transmission and reception path, using a pair of optical fibers forming a collective transmission channel. The device has been designed for transmission systems, where data transmission capabilities are limited.

...text in preparation


ORG-xxx

The ORG-xxx data multiplexers are designed for two ring connections between two-wire or four-wire optical, RS-232 or RS-485 interface devices.

...text in preparation


Exemplary ORG-120 device

 


STC-1xx

Transmission starcouplers

STC transmission starcouplers have been designed for systems in which it is necessary to communicate with many secondary devices operated by means of one or two primary channels. One of them is main and the other - reserve. STC devices may operate in several modes of a standard serial transmission multiplexer as well as in more advanced modes which enable transmission monitoring and supervising.

...text in preparation


Exemplary STC-140 device

 

 Brochure > STC-xxx [1,745kB]

STC-2xx

The family of STC-2xx devices can be divided into two functional groups.

The first group. It consists of devices for remote access to many slave devices (eg security, disturbance recorders, data concentrators) by means of a single master link.

The second group is the first group that is logically reversed. It is made up of devices that perform the function of transmission multiplexer. In this case, it is necessary to communicate with multiple slave devices using one or two master channels.

...text in preparation


Exemplary STC-221 device
 Brochure > STC-xxx [1,745kB]

STC-3xx

The STC-3xx switch has been developed for systems that need to communicate with multiple slave devices via Ethernet.

The device allows you to establish a network connection between one of the slaves and the remote master system within the so- remote engineering link. The switch ensures proper operation with a variety of slave devices for parameterisation, data reading and work control.

...text in preparation


Exemplary STC-311 device
 Brochure > STC-xxx [1,745kB]

UPT-00x

The UPT-00x provides switching paths. It was designed for systems with dual RS-232 links, one of which is the so-called, basic channel, and second reserve.

...text in preparation


Exemplary devices: UPT-004 (on top), UTP-002 (in the middle), UTP-003 (on bottom)

 


ZDC-100

The Managed Frequency Division ZDC-100 is used to divide and distribute the clock signal using multimode fiber.

...text in preparation


Exemplary ZDC-100 device
 
   Print    Send e-mail to us