Mikronika » Multiplexers and sygnal duplicating

Multiplexers and sygnal duplicating

These devices are adapted for communication with many devices that do not require simultaneous operation. These devices work in address or unaddressed mode.

MKT-130
ORG-xxx
STC-1xx
STC-2xx
STC-3xx
UPT-00x
ZDC-100

MKT-130

Not recommended for apply in new solutions

The task of MKT-130 is to transmit binary data in eight channels, in the transmission and reception path, using a pair of optical fibers forming a collective transmission channel. The device has been designed for transmission systems, where data transmission capabilities are limited.

...text in preparation

 

ORG-xxx

The ORG-xxx data multiplexers are designed for two ring connections between two-wire or four-wire optical, RS-232 or RS-485 interface devices.

...text in preparation

Exemplary ORG-120 device

STC-1xx

Transmission starcouplers

STC transmission starcouplers have been designed for systems in which it is necessary to communicate with many secondary devices operated by means of one or two primary channels. One of them is main and the other - reserve. STC devices may operate in several modes of a standard serial transmission multiplexer as well as in more advanced modes which enable transmission monitoring and supervising.

...text in preparation

Exemplary STC-140 device

STC-2xx

Not recommended for apply in new solutions


The family of STC-2xx devices can be divided into two functional groups.

The first group. It consists of devices for remote access to many slave devices (eg security, disturbance recorders, data concentrators) by means of a single master link.

The second group is the first group that is logically reversed. It is made up of devices that perform the function of transmission multiplexer. In this case, it is necessary to communicate with multiple slave devices using one or two master channels.

...text in preparation

Exemplary STC-221 device

STC-3xx

Not recommended for apply in new solutions


The STC-3xx switch has been developed for systems that need to communicate with multiple slave devices via Ethernet.

The device allows you to establish a network connection between one of the slaves and the remote master system within the so- remote engineering link. The switch ensures proper operation with a variety of slave devices for parameterisation, data reading and work control.

...text in preparation

Exemplary STC-311 device

UPT-00x

The UPT-00x provides switching paths. It was designed for systems with dual RS-232 links, one of which is the so-called, basic channel, and second reserve.

...text in preparation

Exemplary devices: UPT-004 (on top), UTP-002 (in the middle), UTP-003 (on bottom)

ZDC-100

The Managed Frequency Division ZDC-100 is used to divide and distribute the clock signal using multimode fiber.

...text in preparation

Exemplary ZDC-100 device

Ask for products

    Our Clients

    MIKRONIKA sp. z o.o.

    60 - 001 Poznań
    Wykopy 2/4
    Poland
    NIP: 779 25 02 760

    MIKRONIKA sp. z o.o.

    magnifiermenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram