COLOR - not recommended for use | COLOR - module/device manufactured
These devices are designed to control the operation and implement controls for radio and television transmitters in RTV relay stations within the scope of remote monitoring systems for these stations implemented by Mikronika. The open communication protocol in which the devices of this group are equipped enables easy use of these devices in the systems of other manufacturers.
Devices from the group of RTV controllers monitor the operating parameters of broadcasting systems, such as emission power, level of synchronization and luminance of video signals, modulation level, presence and quality of RDS signal, presence of a stereo encoder pilot signal. The control of parameters of modulating video and audio signals includes signals at the input of the transmitter, as well as at the output of the transmitter after demodulation in the control RTV tuners.
Depending on the configuration and set limit parameters, these devices can perform the following functions:
In accordance with the implemented operating algorithms of the entire system, these devices also perform control functions:
The above devices, as part of the RTV broadcasting station supervision system, cooperate with the SO-52RTVxx controller. It is built of specialized RTV modules and typical packages of SO-52xx system object drivers, widely used and tested in difficult conditions of industrial power engineering. []
Not recommended for apply in new solutions
The KMN-101 Transmit Power Controller is a universal eight-channel high-frequency peak detector, designed to measure and control the power of radio and television transmitters in earth stations. The controller also enables determination of the reflected wave coefficient and the standing wave coefficient WFS.
The KMN-101 device consists of the following functional blocks:
The operator terminal consists of an LCD display and a 4-button keyboard. Using the local terminal, you can check the measurements, reconfigure the device and view the transmission status. The same can be done by using remote support. Configuration software or third-party software supporting the device must be installed on the remote computer. []
Not recommended for apply in new solutions
The KMR-2xx controller is designed to detect the loss of audio signals fed to the input of the radio transmitter and to generate an alarm to the supervisory system. The controller has two independent dual-track control channels. The device is used in radio station supervision systems.
The KMR-2xx module has two transmission links using the MODBUS protocol:
The controller is manufactured in a 1U/19” housing with the possibility of mounting in a 19” standard cabinet. []
Not recommended for apply in new solutions
The KTR-101 Radio Tuner Module is a high-class control receiver designed to receive and control programs broadcast by radio transmitters and distributed in cable networks in the CCIR band with FM modulation. The parameters are controlled by audio signals after demodulation, STEREO pilot signal, RDS signal and high frequency output signal level. from the transmitter. The KTR-101 module can also function as a retransmission receiver.
KTR-101 consists of the following modules:
The controller is manufactured in a 1U/19” housing with the possibility of mounting in a 19” standard cabinet.
The tuner has two independent transmission channels T1 and T2, supported by the MODBUS protocol. Each of the channels can be used to cooperate with the SYNDIS master system. Through the channels, you can read and write settings and device parameters. []
Not recommended for apply in new solutions
The KTR-131 Control Radio Tuner is a high-class device designed for sequential reception and control of programs broadcast by radio transmitters and distributed in cable networks in the CCIR band with FM modulation. The parameters are controlled by audio signals after demodulation, STEREO pilot signal, RDS signal and high frequency output signal level. from transmitters. The tuner allows you to control up to 16 stations at the same time.
KTR-131 consists of the following modules:
The controller is manufactured in a 1U/19” housing with the possibility of mounting in a 19” standard cabinet.
The tuner has two independent transmission channels T1 and T2, supported by the MODBUS protocol. Each of the channels can be used to cooperate with the SYNDIS master system. Through the channels, you can read and write settings and device parameters. []
Not recommended for apply in new solutions
The PMR-10x modulation switch is used to switch between stereo audio signals fed to the input of the radio transmitter from the primary and backup sources. The task of the switch is to determine which of the signals - reserve or primary - is correct and switch to the appropriate one.
Switching can be done:
The PMR-10x modulation switch is used to switch between stereo audio signals fed to the input of the radio transmitter from the primary and backup sources. The task of the switch is to determine which of the signals - reserve or primary - is correct and switch to the appropriate one.
Switching can be done:
The controller is manufactured in a 1U/19” housing with the possibility of mounting in a 19” standard cabinet. The design of the device allows for the optional use of one local control and monitoring terminal that supports several different station devices. The switch can be operated remotely using commands in the MODBUS protocol, by a superior system or configuration program - or manually, using buttons located on the front panel. []
